LED strip lights are one of the best lighting products for decorative and functional lighting in homes, commercial spaces, and building exteriors. However, in some cases, these lights can burn out or fail, usually due to improper installation or misuse. In this article from EDC, we will look at the main reasons why LED strip lights burn out and how to prevent this problem. In addition, we will answer questions about whether these lights can be repaired.
Why LED Strip Lights Burn Out
Hose string is one of the lighting sources used to decorate and illuminate various spaces. These strings can be installed in a variety of ways due to their high flexibility. The material of these strings is designed to be resistant to adverse environmental conditions and have a long lifespan and durability.
One of the problems you may encounter when using hose string is burning the string. This problem can occur for several reasons, each of which requires careful investigation to identify the main cause. To fix this problem, you must first examine factors such as the string voltage, battery, connector, lamp, poles, and power source to identify the cause of the hose string burning.
Voltage fluctuations
One of the main reasons for hose string burning is voltage fluctuations in the electrical system. Strings require a certain voltage, and if this voltage is higher or lower than the permitted range, it will damage the string’s internal circuit. Constant voltage fluctuations can cause the circuit to heat up and eventually burn out. To prevent this problem, it is very important to use a surge protector and ensure that you have a stable power system.
Improper installation and poor connections
Improper installation or poor connections can be another reason for the hose string to burn out. If the connectors or wires are not connected properly, the electrical current is transferred incorrectly, which causes heat to build up and ultimately the string to burn out. To prevent this, be sure to use quality connectors and install carefully to avoid further problems.
Excessive heat, the cause of hose string burning
The string can be caused by excessive heat in the environment or the string itself. Placing the strings in hot environments, close to heat sources, or being exposed to direct sunlight can cause heat to build up in the circuit. If the string is not cooled properly, this heat will cause parts of the string to melt and eventually burn out. Installing the strings in well-ventilated areas and avoiding direct contact with heat can prevent this problem.
Low product quality and string burning
The low quality of the materials and components used in the manufacture of hose strings can also be another reason for their burning. Strings made of cheap and inferior materials are usually more vulnerable to environmental conditions and electrical fluctuations. Therefore, choosing high-quality strings from reputable brands can be effective in increasing their lifespan and reducing the likelihood of burning.
EDC offers a range of quality lighting products, including hose strings. For purchase or more information, you can contact EDC experts.
Moisture entering the string
Moisture and water can penetrate the circuits of the hose string and cause a short circuit and burning of the string. This issue occurs more often in open places or humid environments. Using waterproof hoses with the appropriate IP rating and installing them in protected locations can help prevent moisture damage.
Long-term use of hose reels without a break
Continuous and prolonged use of hose reels without turning them off and giving them a break can cause the temperature of the hose reel to increase and result in burning out. To avoid this problem, it is better to turn off the reels regularly to reduce the temperature and prevent damage due to overuse.
Incompatibility with the power supply
Failing to choose the right power supply for the hose reel is another reason for burning out the reel. If the power supply does not provide the appropriate voltage or current for the reel, the reel circuit will not work properly and will fail over time. To avoid this problem, always make sure that the power supply is compatible with the needs of your reel.
Reasons for the hose reel to stay half-lit
Sometimes it is observed that the hose string works half-lighted or intermittently. This problem can be due to technical defects in the internal circuit or failure of the LED components. Power fluctuations or weakness in the power supply can be another cause of this problem.
If you encounter this problem, first ensure that the power supply is healthy and the wires are connected correctly. If the problem persists, you may need to replace the faulty parts or the entire string.
Tips to prevent hose strings from burning
To prevent voltage fluctuations, it is recommended to use a voltage protector to provide a constant voltage to the string and protect it from power fluctuations.
Be sure to use quality connectors and proper installation so that the current is transmitted properly.
Proper ventilation helps cool the string and prevents it from overheating.
It is better to turn off the strings periodically to reduce their temperature and extend their lifespan.
In wet or outdoor locations, always use hose reels with waterproof standards (high IP) to prevent moisture from entering the circuit and reduce the chance of the reel burning out.
Can a burnt out reel be repaired?
One of the most common questions about burnt filaments is whether they can be repaired or should they be replaced entirely? The answer to this question depends on the type of damage and the severity of the damage. In cases where only part of the filament is burnt, it is possible to repair and replace the defective part, but if the entire filament is burnt, its complete replacement is recommended.
Is repair better or replacement?
Repairing a burnt filament is more economical in some cases, but repairs that are not carried out correctly can pose risks, including fire. Therefore, if you do not have sufficient expertise in the field of electronic repairs, it is better to think about replacing the filament to prevent more serious problems.
Steps to repair a burnt filament
If you decide to repair a burnt filament, follow these steps:
Check the power supply: First, make sure that the power supply is healthy and there are no power fluctuations.
Diagnosing the location of the failure: Find the burnt section of the filament. Usually, parts that have changed color or burned indicate a failure.
Disconnecting the power to the string: Before doing anything, completely disconnect the power to the string.
Replacing the defective part: Disconnect the defective part of the string from the circuit and replace it with a healthy part.
Reconnecting the power: After completing the repairs, reconnect the power to the string and check its operation.
See other common problems for maintaining and repairing your LED string in this article.
Buy a variety of high-quality strings from EDC
Striplight is the equivalent of light string and is known as one of the most popular types of lighting. To prevent premature failure, it is recommended to purchase your strings from reputable stores and in compliance with the necessary standards. Proper maintenance of these strings will significantly increase their lifespan and allow them to work well for a long time.
If you are looking to buy strip lights in various types and with high quality, the EDC brand is one of the best choices for you. This brand offers a range of high-quality hose strings that are resistant to environmental factors such as moisture, dust and voltage fluctuations. EDC products have reliable standards and are suitable for use in indoor and outdoor spaces. By purchasing from EDC, you can be sure of the long life and optimal performance of your strings.
