If you are looking to light up your bedroom, living room, or building facade in a different and special way, strip lights and ribbons are a great option for you. These ribbons come in large, cuttable rolls, which makes them very easy to install and adjust. Due to their low energy consumption and long lifespan, these ribbons are a popular choice for various lighting and decorations. In this article from EDC, we will examine the methods of installing LED linear ribbons, hoses, etc., and explain the necessary equipment, installation steps, and safety tips.

What is LED ribbon and what is its use?

LED ribbon is a flexible ribbon covered with small LED bulbs. These ribbons are produced in various colors and lengths, and due to their high flexibility, they can be installed anywhere. LED strips have a wide variety of uses and can be used for mirror lighting, sign lighting, kitchen lighting (cabinets, ceiling, etc.), lighting behind a TV, etc.

Equipment needed to install a linear LED strip

To install an LED linear string, you will need the following equipment:

LED string
Appropriate power supply
Wire and cable
Double-sided adhesive or special adhesive tape
Wire cutting and connecting devices
Screws and dowels (if needed)
Installation and maintenance tools (such as drill and screwdriver)
Installing an LED light string in 10 steps

Determine the installation location: First, determine where you want to install the strings. Indoors, on the facade of a building or outdoors?
Measure and cut: Measure the required length of the string and cut accordingly. If cutting is required, use special tools for this and note that the cuts must be at the specified points to prevent damage to the LEDs.
Surface preparation: The surface on which the string will be installed must be clean and dry. Any dust or moisture can reduce the adhesion of the string.
Select a power supply: Make sure that the power supply is compatible with the voltage and current required by the LED strings. The LED string voltage selection guide can help you choose the right voltage.
Install the power supply: Install the power supply in a suitable and safe location. Note that the power supply must be suitable in terms of environment, such as weather resistance.
Using Connectors: To connect the strands together, you can use purchased connectors. This method is easier and faster.
Soldering: If you are looking for a more permanent and durable connection, soldering is a better option. This method is especially suitable for outdoor installation.
Attaching the strands: To attach the strands to the surface, use the adhesive on the back of the strands. Make sure the strands are installed correctly and without wrinkles.
Connecting to power: Connect the strands’ wires to the power supply. Make sure all connections are tight and correct.
Function test: After connecting, turn on the strands and make sure they are working properly. If you notice any problems, check that the connections are made correctly and that the power supply is not faulty.
How to Install Needle Thread on a Wall

To install needle thread, you need simple tools and by following a few easy steps, you can do it:

Using a measuring tape, determine the exact size of the area where you want to attach the thread.
Cut the thread to the desired size with scissors.
Stick the double-sided tape on the back of the thread.
Peel off the protective layer of the double-sided tape and gently stick the thread on the desired surface.
Make sure that the entire length of the thread is well adhered to the surface.
Connect one end of the power supply cable to the electrical outlet and the other end to the thread.
Turn on the power switch to turn on the thread.
How to Install Hose Thread on a Building Facade

Before starting work, prepare a plan of how the strands will be placed on the facade.
Determine the installation location of the transformer and cables.
Pay attention to the type of facade material and ensure that the installation method is suitable for it.
Clean and dry the surface on which the strands are to be installed.
Remove any dirt, dust, or grease.
Place the transformer in a safe and accessible location.
Plug the transformer into a separate electrical outlet.
Route the extension cable from the transformer to the installation location of the strands.
Connect the cable firmly and securely to the transformer and strands.
Use insulating tape to insulate the connections.
Using a drill, screws, and dowels, install the fasteners at appropriate intervals on the facade.
The distance between the fasteners depends on the type of strand and its length.
Tighten the fasteners tightly so that the strands are well fixed.
Place the strands on the fasteners and secure them.
If necessary, use a moisture barrier to protect the strings from moisture.
Test the strings before connecting to the mains.
Ideas for how to mount LED strings on the wall

Lighted Picture Frame: Create a beautiful lighted frame by gluing string around a picture frame or mirror.
Lighting behind the TV: Create an attractive ambient lighting by gluing string behind the TV.
Create a light path: Create a beautiful light path in the room by gluing string to the wall.
Write a name or favorite word: Use string to write your name or a motivational word on the bedroom wall. Read more ideas about this in the article String Lights for the Bedroom.
Under Cabinet Lighting: Brighten up the kitchen by gluing and installing hose string under the cabinet.

If you are looking for more ideas for string lighting, we recommend reading the related article.

How to Connect LED String to Electricity

Here is how to connect LED string to electricity:

Check the connections: Make sure all string connections are made correctly and are tight.
Connecting to the power supply: Connect one end of the power supply cable to the power supply outlet and the other end to a power outlet.
Turning on the string: After connecting to the power supply, turn on the power supply switch and make sure that the string lights up.

To connect the LED string to the power supply, keep the following safety tips in mind:

Voltage: Always match the power supply voltage to the voltage specified on the string.
Grounding: Make sure that the power outlet has a ground connection and that it is safe.
Work environment: When working with electricity, make sure that your hands and the work area are dry.
Cables: Make sure that the power cables are safe and undamaged.
Overloading: Avoid connecting too many strings to a power supply. This can cause the power supply to overheat and pose a hazard.
Installation in wet locations: If you plan to install the string in wet locations, use outdoor strings and a waterproof power supply.
Can LED strings be connected together?

Yes, many LED strings, especially hose and neon flex models, can be easily connected together. However, proper connection equipment must be used to prevent voltage drops.

Buy a variety of LED strings from EDC

Looking for a way to beautify your surroundings at a low cost? EDC strip lights can meet your needs. With an unparalleled variety of colors, sizes, and designs, these strings provide countless possibilities for lighting and decorating different spaces. From bedrooms to birthday parties and even exterior home decoration, EDC strings can have a variety of uses.

By purchasing EDC brand ribbon lights, you not only get access to a high-quality and long-lasting product, but you can also benefit from the advice of the brand’s experts to choose the best option to suit your needs and taste. Whether you are looking for bedroom lighting or want to illuminate the facade of a building, EDC ribbons meet all your needs.