Proper lighting using park and yard lights can make the desired environment more beautiful, in addition, it is also effective in creating security and lighting the space. But how can these lights be installed correctly? This article from EDC explains step-by-step how to install park and yard lights and the tools and equipment needed for installation.

The importance of using park and yard lights

Park and yard lights not only illuminate the surrounding space, but also have other uses that are particularly important depending on the environment:

Increase safety: By illuminating paths, they prevent possible accidents.
They affect the beauty of the environment: With proper lighting, you can highlight the strengths of the area.

But how to install these lights is very important. Improper installation can damage the lights, cause excessive energy consumption, and even pose a risk of electric shock.

Types of park lights

There are different types of park lights:

Lawn lights: Lawn lights, also known as inground lights, are installed at ground level and emit light directly upward. These types of lights are commonly used to illuminate walkways, gardens, and lawn edges.
Wall lights: Outdoor wall lights are mounted on walls and are suitable for illuminating paths.
Pendant lights: These lights are hung from the ceiling or tree.
Pedestal lights: Pedestal lights, with a tall, pedestal design, are installed upright in park spaces. These lights are commonly used to illuminate streets, parks, and walkways.
Tools and Equipment Needed to Install Parking Lights

To install parking lights, you will need the following tools:

Screwdriver
Wrench
Meter
Drill
Appropriate wrench
Wire crimper
Insulation
Electrical tape
Jump box
Electrical wires of appropriate length
Parking light installation steps

Before you begin the step-by-step installation of parking lights, it is important to keep the following safety tips in mind:

Before you begin, be sure to turn off the main power.

Use gloves and safety glasses.
Stand firmly on a ladder or scaffolding.
Do not use damaged wires.
Insulate the connections well.

By following these simple steps, you can install a parking and yard light:

Determine the exact location of the light and make sure it is in a safe and accessible place.
Prepare the necessary tools and equipment.
Turn off the main power.
If your parking light has a base, you need to dig a hole in the ground the size of the base. The depth of the hole should be enough for the base to be firmly fixed in the ground.
Place the base of the light in the hole and secure it with concrete or cement. Allow the concrete or cement to dry completely.
Connect the light wires to the junction box.
Run the wires through the protective tube to prevent them from getting damaged.
Route the wires to the location where the light will be installed.
Install the light on the base and tighten the screws. Make sure the light is fully secured.
Connect the wires to the power supply. Carefully check the connections and make sure they are well insulated.
Use electrical tape to secure the connections.
Connect the main power and turn on the light. Check the operation of the light and make sure it is working properly.
Installing a free-standing yard light

After selecting the installation location, if necessary, dig a hole of the appropriate depth for installing the lamp base.
The depth of the hole should be enough for the base to fit well and be fixed.
Place the lamp base in the hole.
Secure the base to the ground using bolts and nuts. If the base requires concrete, pour concrete into the hole and allow it to dry.
Prepare the electrical wires using a wire cutter and wire stripper.
Connect the wires to the lamp and the power source. Use strong, standard connectors and make sure the wiring is done correctly.
Install the lamp on the base and make sure it is installed correctly and level.
If the lamp has an adjustable light angle, adjust it so that the light is evenly distributed in the environment.
After installation, turn on the lamp and check that the light is properly and evenly distributed in the environment. Make final adjustments if necessary.
Standard spacing of park lights

The standard spacing for installing park lights depends on several factors:

Light type:
The standard spacing for LED lights is usually between 10 and 20 meters.
Metal halide lights produce a stronger light and are usually installed at greater distances for larger spaces, with a distance of between 15 and 30 meters.
Halogen lights produce less light than LED and metal halide and therefore should be installed closer together, with a distance of between 8 and 15 meters.
Type of environment:
Public parks and green spaces: In these spaces, the distance between the lights is usually between 15 and 25 meters, depending on the dimensions and design of the park lighting.
Walkways and narrow paths: To create uniform lighting and avoid dark areas, the distance between the lights may be reduced to 8 to 12 meters.
Playgrounds and high-traffic areas: In these spaces, due to the need for more lighting and security, the distance between the lights can be adjusted to 10 to 15 meters.
Light intensity and beam angle:
Lights with a wide beam angle: These lights can be spaced further apart because they spread the light widely. A distance of 15 to 20 meters is suitable.
Lights with a narrow beam angle: These lights need to be installed closer together to distribute the light evenly. The recommended distance is between 8 and 12 meters.
Important points in installing parking lights

Choosing the right location: The location of the light installation should be such that dark spots are not created.
Appropriate height: The height of the light installation depends on the type of light and its application.
Correct wiring: Wiring should be done in a standard manner and using appropriate insulation.
Protection against water: Lights installed outdoors must be water resistant.
Pay attention to the weight of the light: The base of the light must be strong enough to support the weight of the light.
Parking light installation fee

The cost of installing a parking light can vary depending on various factors, including:

Type of light: Installing more complex and larger lights requires more time and expertise.
Installation location: Installing lights in remote or difficult locations will cost more.
Number of lights: The more lights installed, the higher the installation cost.
Buy a variety of park lights from EDC

EDC park lights with diverse designs and high quality are an ideal choice for lighting outdoor spaces. By purchasing EDC park lights, you can easily illuminate the desired space and double its beauty. These lights are produced in various types such as wall, floor, pendant, etc. and are compatible with any taste. In addition to beauty, EDC park lights have a long life, low energy consumption and high resistance to weather conditions.