Track lights are one of the most popular lighting products and have gained great popularity with their beautiful design and unique performance. These lights are considered a suitable option for lighting various spaces due to their many features, including easy adjustment and installation. In this article from EDC, the steps for installing track lights are explained step by step.

Where to install track lights

Track lights are suitable for the spaces you see in the list below and can be easily installed on the ceiling or wall due to their special design.

Galleries
Art exhibitions
Lighting of various types of stores
Lighting of small shops
Office lighting and …

If you intend to choose and buy a track light from among the various models available on the market or want to learn more about its features and applications, we recommend reading the article “Track Light Buying Guide”.

Choosing an installation surface:

Brick ceilings and walls: Use screws and dowels or roll bolts to install on these surfaces for a secure and safe installation.
Knauf and PVC ceilings: Use special screws for installation to avoid damaging the ceiling structure.
Rabbit and MDF ceilings: Wing screws are a good option for installation on these surfaces.
Acoustic ceilings: Due to the high weight of the lights, installation on acoustic ceilings is not recommended.

The installation location should be chosen in a way that is electrically and structurally suitable. Make sure that the ceiling or wall is able to support the weight of the rail and lights.

Note: It is interesting to know that rail lights are also included in the category of shop lights.

The tools and equipment needed to install track lights include:

Screws and dowels: To secure the tracks to the ceiling or wall.
Drill and auger: To make the necessary holes in the ceiling or wall to install the screws and dowels.
Electrical wire and connectors: To connect the electrical wires to the tracks and lights.
Measuring and leveling tools: Including a meter, level and ruler to ensure accurate installation and alignment of the tracks.
Screwdriver and wrench: To install and adjust the screws and connectors.
Electricity meter or voltmeter: To check the voltage and current of the electricity and ensure the safety of the installation.
Electrical insulation: To insulate electrical connections and prevent electrical hazards.
Wire cutter: To cut electrical wires to the required length.
Safety gloves and protective glasses: For personal safety when working with electrical tools and materials.
Silicone paste or special glue: To secure and fix the lights on the tracks (optional and depending on the type of installation).

Using these tools and equipment, you can install track lights without any problems.

How to Install Track Ceiling Lights Step by Step

To install track ceiling lights, follow these steps:

1. Prepare the installation location

Determine the location where you will install the track lights. This location should be flat, firm, and safe for installing electrical equipment.
Make sure that the power source is nearby and that the power is turned off during installation.
2. Install the track light

Using a tape measure and level, measure the location of the rail and mark the necessary points on the ceiling.
Using a drill and a drill, make the necessary holes in the ceiling at the marked points.
Insert the dowels into the drilled holes.
Install the rails on the dowels using screws and a screwdriver.
Make sure the rails are perfectly level and firmly installed.
3. Wire the rail light

Connect the electrical wires to the electrical connections on the track. Use a wire stripper and the appropriate tools to do this. Make sure the connections are tight and well insulated.
Verify the electrical connections are secure using a voltmeter or ammeter.
4. Install the lights on the track

Place the lights on the rails and make sure they are properly seated. Some lights may need to be screwed or locked.
Adjust the position of the lights on the rails to distribute the light evenly and properly.
5. Turn on the lights and make sure they are working properly

Turn on the power and check the operation of the lights. Make sure that all the lights are turned on properly and the light is evenly distributed.
Make sure that there are no problems with the electrical connections or installation of the lights and that everything is working properly.
What is the difference between COB and dark light track lights?

You can see the differences between COB and dark light track lights in the table below:

Conclusion

Installing track lights can be done easily by following the steps mentioned and using the right equipment. With this guide, you can install track lights correctly and without any problems.